We've stumbled on this post about What Would Cause My Electric Water Heater to Stop Working? directly below on the net and thought it made sense to relate it with you over here.
Several modern-day residences make use of an electric water heater for their heater, because of its ease and also convenience of use. Nonetheless, similar to any other electrical appliances, problems may arise with its usage, unexpectedly. It can be really aggravating to get up to a chilly shower rather than a hot one or having your bath with water that isn't hot sufficient and even also warm. Whatever the case may be, water heater troubles can be quite nerve-racking. Thankfully, we've made a checklist of feasible services to your water heater concerns. There are a number of factors that can trigger a lot of these troubles, it could be a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the issue is, getting it fixed must not position way too much of a problem if you follow these actions:
Check Your Power Supply:
As fundamental as this may appear, it is really needed. Without appropriate power, your water heater will not operate. So the first thing to do when your water instantly retires is to verify that it isn't a power problem. Examine if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the concern, just turn it off and on once more. Replace any busted or damaged fuse. Evaluate the appliance with power after these adjustments to see if it's currently working.
Check the Burner in the Water Heater:
If it's not a power problem, after that attempt having a look at your burner if it is still functioning. Evaluate each of your burner to ensure the problem isn't with any one of them. If any one of them is defective, change that component and then examine whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot enough, you might need to examine the temperature setups on your top thermostat. Ensure the breaker is switched off prior to doing anything. Open the accessibility panel as well as press the red switch for temperature reset above the thermostat. This must help heat up the water. Turn the breaker back on and examine if the problem has actually been fixed.
Call A Specialist:
If after replacing all faulty parts and resetting your temperature level, the water heater still isn't working, you may require to speak to a professional plumber for a specialist opinion. The issue with your heating unit could be that the cold and hot taps have been switched over or it may be undersized for the amount of hot water needed in your house. Whatever the case might be, a specialist plumber would assist address the problem.
Final thought
Hot water heater problems are not always significant. Many of them are because of small concerns like a blown fuse or damaged heating element. Replacing the malfunctioning components need to do the trick. However, if you are still not able to fix the trouble, give a call to your local plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our part about Hot Water Heater Repair. Thanks a lot for taking the time to read through our short article. Do you know about somebody who is interested by the niche? Feel free to share it. Thanks a bunch for your time. Come back soon.
About This